Another Cold Day and Glue up of side Turrets

Another cold day.  The shop is warm and I heated the glue in hot water to get ready to glue up the side turrets.  I glued them on and clamped them. I also put some small nails in from the back to hold them in place.  Now I have to turn my attention to the top.  I milled a small piece of stock and traced the design on to the wood.  I added 1/2" to the circles to allow for the round over.  I band sawed the curves and used the router to round over the edges.  I worked pretty good, so now I have to figure out how to carve the inside of the table top.
Here is today's video: