Hi, I have finished carving the legs and scrapped, filed and sanded the legs to 150 grit, so they can be attached to the table frame. It is much easier to do the major surface preparation before the legs are attached. I will sand them to 320 grit before finishing but that should not be too much works since they have been sanded to 150 already.
I glued the corner turrets to the legs in preparation for attaching to the apron table frame. I'll do that tomorrow.
I split apart the side turrets and scraped the paper and glue from between them and then cut them to exact size. If I have time, I may attach them as well tomorrow.
So here is the video:
No comments:
Post a Comment